Measuring method can be used for a single chamber furnace only. 用实测、计算、观测颜色等确定真空炉内加热时间的方法各有利弊。
Numerical simulation and analysis of the chamber process in a garbage furnace before and after reconstruction 造纸垃圾焚烧炉改造前后炉内过程数值模拟分析
The utility model discloses a mobile suspension feeding and discharging machine, which is used for feeding and discharging forging blanks for a chamber type heating furnace. 本实用新型是一种机动悬挂式装出料机,用于给室式加热炉装出锻件坯料。
Adjustment of Superheating Steam Tubes of Convection Chamber in Atmospheric Pressure Furnace of Atmospheric and Vacuum Distillation Unit 常减压装置常压炉对流室过热蒸汽炉管的调整
Research and Design of Continuous Double Chamber Aluminizing Maintaining Furnace 连续式双室铝熔化保温炉的研究设计中频无心感应熔炼炉
Influence of New Type Reflection Plates on Flow and Heat Transfer Inner Radiation Chamber of Cylindrical Furnace 新型结构反射板对圆筒炉辐射室流动及传热的影响
The wear and corrosion at high temperature of cooling tubes for the power plant boils are closely related with flame temperature in chamber of furnace, sulphur content of coal, and erosion of ash particles. 火电厂锅炉水冷壁管高温腐蚀和磨损与炉膛火焰温度、燃煤的含硫量、烟气与灰粉颗粒的冲蚀密切相关。
Design and Adjusting of Nitrogen-Based Atmosphere Carburizing Process for a New Mult-Purpose Chamber Furnace 新箱式多用炉氮基气氛渗碳淬火工艺的设计与调试
The effection and methods of controlling chamber pressure in heating furnace are narrated. 论述了加热炉炉膛压力控制的作用、控制方法。
The separation control strategy is efficient and practical in keeping combustion efficiency and improving the control quality of chamber temperature of reheating furnace. 实际工业应用结果表明,分离控制不但较好地解决了热值波动时燃烧效率问题,而且改善了炉膛温度的控制质量。
Influence of heat-supply mode by the CAPL type soaking chamber on furnace temperature distribution and hot waving of strip CAPL均热室供热制度对炉温及带钢热瓢曲的影响
The system reasonably solved the problem of "material in the chamber of furnace dropping down" and "slag entering into the tuyere" due to a sudden trip of blast furnace blower. 该系统较好地解决了高炉因鼓风机突然跳闸造成炉膛坐料、风口灌渣问题。
Study on Two-dimensional Flow and Temperature Field of the Radiative Chamber of a Cylindrical Pipe Furnace 管式圆筒炉辐射室二维流场和温度场的研究
The conditions to realize automatic control of chamber pressure in heating furnace are concluded. 给出了实现加热炉炉膛压力自动控制的条件。
Baking process model and numerical simulation for the chamber furnace 室状加热炉烘炉过程数学模型及其数值模拟
Four Chamber Smelting Furnace with Hot Bed and Cold Lid 田字型双级双向热底冷盖熔铝炉
Analysis and treatment of instantaneous appearing positive pressure in the chamber of boiler furnace 锅炉炉膛冒正压力的原因分析及处理
Melting quality of a Pyrex type glass was improved considerably by tapping the bottom dirty layer from the side wall of the working chamber of the furnace. 采用成型池两侧壁打孔放料的办法,排除了炉池底部脏料,显著改进了高硼硅质玻璃的熔制质量。
Practice of modifying shape of combustion chamber in heating furnace 加热炉燃烧室形状改进实践
Construction of bottom electrode and chamber of DC mineral furnace 单电极直流矿热炉底电极及炉膛砌筑的改进
Taking the automotive rear axle gear as an example, the design and adjusting of nitrogen-based atmosphere carburizing process were conducted on the new-built mult-purpose chamber furnace. 以汽车后桥齿轮为实例,在新制造的箱式多用炉上进行了氮基气氛渗碳淬火工艺的设计、调试和检测。
Analysis of Tube Falling off from Bracket and Breaking down in Radiation Chamber of Atmospheric Furnace 常压炉辐射室炉管脱挂倒塌原因分析
A heat transfer mathematical model is set up about the baking process of some regenerative chamber furnace to be built, including heat balance of furnace hearth model, composit wall heat transfer model and exhaust gas temperature calculation model. 以某公司拟建的高温蓄热式室状加热炉为研究对象,建立了烘炉过程传热数学模型。其中包括:炉膛热平衡数学模型、复合炉墙传热过程数学模型和废气温度计算模型等。
By means of analysis on the operation parameters both before and after cleaning convection chamber of conversion furnace, explained that; By the use of medicament spray cleaning on the outside wall of convection chamber was the effective method to increase the heat efficiency for conversion furnace. 通过对转化炉对流室炉管清洗前后的操作参数分析,说明对流室炉管外壁采用药剂喷淋清洗是提高转化炉热效率的有效手段。
Methods and conditions of automation for chamber pressure control of heating furnace 加热炉炉膛压力自动控制的方法及可实现条件
The control accuracy of temperature is up to ± 2 ℃, the distribution of temperature curve along the furnace is rational, the temperature field at the section of the chamber of furnace is uniform, and the atmosphere control is rational. 温度控制精度达±2℃,沿炉长方向温度曲线分布合理,炉膛截面内温度场均匀,气氛控制合理,氧化烧损率小于70g/m2;
Research on Identification Algorithm and Its Simulation of the Radiation Coefficient of Furnace Chamber in Metallurgical Reheating Furnace 冶金加热炉炉膛辐射系数的辨识算法及仿真研究
CH ⅱ furnace hearth is used for coal gas furnace. Grate, chamber of furnace, core tubes, skirt and blowing pipelines are modified. Good benefit has been obtained. 煤气炉改用CHⅡ炉底,并将炉篦、炉膛、炉芯管、炉裙及吹风管线进行改造,取得较好的效益。
The radiation chamber of furnace in vacuum distillation unit in Fujian Refining& Chemical Co., Ltd was installed with complete ceramic fiber refractory lining in April, 1997. Some of lining at top of chamber spalled after 6 years'operation. 福建炼油化工有限公司减压炉辐射室1997年4月喷涂全陶纤炉衬,运行6年后炉顶内衬发生局部脱落。